Tamura

Products > Power Systems - Low Voltage > Standard Box (Low Voltage)

The Standard Housing is constructed of a single welded body, with a removable upper and lower flange.
Polyester electrostatic powder coating in standard color gray for the framework, door and flanges, and orange.

Materials available for download:

Concordo em enviar meus dados para a Tamura Brasil para que sejam tratados de acordo com a Política de privacidade.

Desejo receber e-mails com orçamentos, ofertas e informações relativas aos produtos, oportunidades e atualizações da Tamura Brasil. O consentimento pode ser retirado a qualquer momento clicando no link de cancelamento de inscrição presente em todas as comunicações por e-mail.

- Protection class IP-54 or IP-65;
- Door opening at an angle of 110°;
- Fitted-in carbon steel hinges;
- Injected sealing rubber;
- Zamack slit-type latch;
- Upper and lower flanges;
- IP-54 – Upper and lower flanges fastened with outer screws;
- IP-65 - Upper and lower flanges fastened with internal stud bolts;
- Perforated profile at the door, on the right-hand side, for cable assembly;
- Grounding point for mounting plate and door;
- IEC-62208 standard;
- Mounting plates made of 1,5mm and 1,9mm sheet metal.

- The essay was carried out at room temperature of (27 ± 2) °C and relative air humidity of (56 ± 5) %.
Essay procedures nº CINTEQ-LEO-PE-306 and CINTEQ-LEO-PE-311 together with NBR-IEC - 60529/2005 and IEC-60529/2001 standards.

The essayed sample shows satisfactory protection agains dust penetration, first numeral equal to 6 - category 2, shows satisfactory protection against water jet, second numeral equal to 5.

- Protection class IP-54 (Outdoors);
- Protection class IP-65 (Outdoors).
- Protection class IP-54 (Outdoors):

5. Protection against harmful dust deposit. Penetration is not entirely prevented.
4. Protection against water splashing from any direction.

- Protection class IP-65(Outdoors):

6. Full protection against dust penetration
5. Protection against water jet from any direction.